
FLUX PLASTER-IN-16 Plaster-In Aluminium LED Profile
KES 1,600KES 1,800

Aluminium LED Profiles
Aluminium channels that turn an LED strip into a clean, professional line of light. Plaster-in, surface, corner, skirting, cornice and pendant profiles, cut to size.
Why Use a Profile
The frosted diffuser hides the individual LEDs, so a strip reads as one smooth, even line of light.
The aluminium channel works as a heatsink. LEDs that run cooler keep their brightness for years longer.
The strip, wiring and PCB are hidden and kept free of dust and knocks. All you see is a neat trim.
Profile Types
Each profile solves a different detail. Pick by where you want the line of light and how it will be fitted.

Set into a gypsum ceiling or wall and skimmed over, so only the line of light shows. The premium choice for new builds and renovations.
Shop plaster-in profiles →
Screw or stick straight onto concrete, brick, tile or timber, with no chasing or cutting. Ideal under cabinets, along shelves and inside wardrobes.
Shop surface profiles →
A 45° channel for wall-ceiling junctions, pelmets and stair edges that lights two surfaces from a single strip.
Shop corner profiles →
An aluminium skirting board with the light built in. Down-lit versions wash the floor to guide the way along corridors and stairs.
Shop skirting profiles →
Replaces a gypsum cornice at the wall-ceiling line and throws a soft glow up across the ceiling.
Shop cornice profiles →
Suspended on cables over dining tables, boardrooms and counters. Join lengths end to end for longer runs.
Shop linear pendant profiles →In Stock
Standard 3 m lengths with the frosted diffuser, end caps and mounting clips included. Cut to size on request.

KES 1,600KES 1,800

KES 1,200KES 1,400

KES 1,200

KES 2,200

KES 1,300

KES 1,800

KES 1,200

KES 4,800

KES 3,400

KES 3,599KES 3,900

KES 250

KES 200

KES 200

KES 250

KES 200

KES 50

KES 5,750

KES 890

KES 200

KES 150

KES 380

KES 300

KES 4,800

KES 1,400

KES 1,800

KES 1,200KES 1,400

KES 1,600KES 1,800
Standard 3 m lengths, with the diffuser, end caps and mounting clips included. We can cut them to your measurements before delivery, and lengths join end to end for longer runs.
Most of our profiles take strips up to 12 mm wide, which covers the common COB and SMD strips. COB strips give the smoothest line through the diffuser.
Surface profiles fix onto a finished wall or ceiling, so they suit existing rooms. Plaster-in profiles go in while the gypsum is being fitted and give the cleanest, invisible finish.
Yes. Profiles ship across Kenya by courier. Delivery is charged at checkout or on your quote.
Tell us where the profile is going and how long each run is. We will cut the profiles to length and match the strip and driver, with a quote.